Calibration Standards

Multi Function Calibrator 4 1/2

Multi Function Calibrator 4 1/2

4½ Multi-Function Calibrator (Site Calibrator)

Make: ZEAL, Model: ZMSMFC4.5

Input Power:230 V AC,50 Hz

DC Voltage Ranges: 200mV, 2V, 20V, 200V, 1000V

AC Voltage (45 Hz to 1k Hz) Ranges: 200mV, 2V, 20V, 200V, 1000V

DC Current Ranges: 2mA, 20mA, 200mA, 2A, 10A

AC Current (45 Hz to 1k Hz) Ranges: 2mA,20mA,200mA,2A, 10A

Fixed Resistance: 1Ω,10Ω, 100Ω, 1kΩ, 10kΩ, 100kΩ, 1MΩ, 10MΩ, 100MΩ

Fixed Inductance:10µH, 100µH, 1mH, 10mH, 100mH,

Fixed Capacitance: 1nF, 10nF, 100nF, 1µF, 10µF

RPM (Non-contact): 60,000 RPM Non-contact type

V/A Selection :By Toggle switch

Range Selection: By Rotary Switch

Setting: V/A setting by multiturn Coarse & fine potentiometers,

Frequency by potentiometer

Accuracy(@ 15°C to 30°C, RH<70%)

DC Voltage: ±0.2% of Rdg±5 Dgt.

AC Voltage: ±0.3% of Rdg±10 Dgt,

Frequency: 0.1 Hz

Resistance: ±0.25%,

Capacitance/Inductance: ±5%

RPM(Non-Contact Type): ±0.1%±5 Dgt

Accessories: X 100 AC/DC current coil for clamp on meters

calibration up to 1000A

Dimensions: W:400 X D:400 X H: 170 mm

Weight: 19kg

Additional Information:

AC / DC High Voltage Measurement Probe(40kV)

AC / DC High Voltage Measurement Probe(40kV)

Technical Specification:

DC Low Current Source

DC Low Current Source

Technical Specification ( Battery Operated):

ModelZMPCB
INPUT POWER9V x 2 Batteries100mAH, with charger Digital Meter (4½ dgt LED)
DC Current source Range 0 to 20mA
Accuracy0.1 % ± 3 digits
DC Voltage source Range0 to 200 mV
Accuracy0.1 % ± 3 digits
RTD (fix 10 positions)
-50, -25, 0, 25, 50, 75, 100, 200, 300, 400??C
Dimensions(170 x 90 x 44) mm
Weight0.5 kg
Dimension(170W x 90D x 44H) mm

Decade Capacitance Box

Decade Capacitance Box

Technical Specifications:
Make:ZEAL
Model: ZSDCB
Specifications: Decades of 1nF, 10nF, 100nF, 1μF, 100µF
Total capacitance range:1nF to 1000 µF
Accuracy:1 %
Residual Capacitance: < 2o pF

Decade Resistance Box

Decade Resistance Box

Technical Specifications:
MakeZEAL
ModelZMDRB-0.1M-100G
Specifications Decades of 0.1 MΩ, 1 MΩ, 10 MΩ , 100 MΩ
Accuracy±5% for all decades and fixed resistors
10 Fix resistors 1 GΩ x 10 in series mounted on acrylic
10 Fix resistors 10GΩ x10 in series mounted on acrylic
Rated maximum voltage1000V : for 0.1 M Ω,1 M Ω,10 M Ω, 100 MΩ
5000V : for all fixed resistors
Dials of 0.1 MΩ, 1 MΩ, 10 MΩ, and 100 MΩ can be used at 5000V when connected in series with any fixed resistor
Power rating1 Watt @50oC

Decade Resistance Box

Decade Resistance Box

DECADE RESISTANCE BOX
MAKE: ZEAL  MODEL: ZMDRB
Specifications:

Accuracy:

Low Resistance Jig

Low Resistance Jig

Technical Specification:

Fixed resistors10µΩ, 50µΩ, 100µΩ, 1mΩ, 10mΩ, 100mΩ, 1000mΩ
Maximum Test currents Maximum Test currents: For 10µΩ, 50µΩ, 20 A
For 100µΩ to 10mΩ: 10 A
For 100mΩ: 1A
For 1000mΩ: 100 mA
Accuracy class0.25% for 10µΩ, 50µΩ, 0.1% for 100µΩ, 1mΩ, 10mΩ, 100mΩ, 1000mΩ

MV / MA / RTD Calibrator ( Universal Calibrators )

MV / MA / RTD Calibrator ( Universal Calibrators )

Technical Specifications:
MakeZEAL
ModelZMPCM
INPUT POWER230 V ± 10% AC single phase
DIGITAL METER (4½dgt)LED
DC Current source Range 0 to 20mA
Accuracy0.1 % ± 3 digits
DC Voltage source Range0 to 200 mV
Accuracy 0.1 % ± 3 digits
RTD(fix 10 positions)-50,-25, 0, 25, 50,75,100,200,300,400 C Transmitter Power Supply DIMENSIONS24V DC
(272 x 150 x 200) mm
WEIGHT1.25 kg Approx
ACCURACY OF RTD SOURCE0.1% OF SET TEMPERATURE

MV and MA Calibrators

MV and MA Calibrators

Technical Specifications:
MakeZEAL
ModelZSPCM
Input Power230 VAC ±10%, Single Phase
DC Currentsource Range0 to 20mA
DC Voltage source Range0 to 200 mV
Accuracy of settings0.1 % ± 3 digits for mA and mV

Multi Function Calibrator (5.5 Digit)

Multi Function Calibrator (5.5 Digit)

Technical Specification:

MakeZEAL
ModelZSMFC 5.5
Input Power230 V AC,50 Hz
DC Voltage Ranges200mV, 2V, 20V, 200V, 1000V
AC Voltage (45 Hz to 1000 Hz)Ranges 200mV, 2V, 20V, 200V, 1000V
DC Current Ranges2mA, 20mA, 200mA, 2A, 10A
AC Current (45 Hz to 1000Hz)Ranges2mA,20mA,200mA,2A,10A
AccuracyDC V: 0.10%, AC V: 0.15%, DC Current ( 2mA to 2A): 0.10%,
AC Current ( 2mA to 2A): 0.15%, For DC & AC 10 A: 0.15%
(Accuracies specified at 25 deg C, RH <70% , basic accuracy ±10 digits for DC parameters & basic accuracy ±15 digits for AC parameters. Basic accuracies of AC parameters defined at 60Hz for all other frequencies : 0.35% )

Features :

Additional Information:

Nano Ampere Source

Nano Ampere Source

Technical Specification:
MakeZEAL
ModelZMLCS
Input Power Battery operated, 9V x 2
Output Ranges1 to 25 nA
Burden1 Volt
Output SettingManually by multi turn Potentiometer
Display4½ digits LCD
Accuracy0.75% rdg ± 10 dgt

Precision Decade Resistance Box

Precision Decade Resistance Box

Specifications:
MakeZEAL
ModelZMPDRB
Resistance Range0.001 Ω to 100 Ω

Technical Specifications:

Three Phase Energy Meter Calibrator

Three Phase Energy Meter Calibrator

Technical Specification:
MakeZEAL
ModelZM3ΦPEC
Input230 Volt AC
Output Voltage Ranges0 to 300 V (L-N) or 0 to 520 Phase to Phase
Output Current Ranges0 to 1.2 A & 0 to 6 A per phase
Mode3 Phase, 4 Wire
Output portsVr (Hi,Lo),Vy(Hi, Lo),Vb(Hi, Lo), Ir (Hi, Lo),Iy (Hi, Lo),Ib (Hi, Lo)
PF Range0.1 lag to Unity to 0.1 lead
Compliance20 VA, at FS on V ranges, Compliance: 20 VA, at FS on A channels
Frequency45 to 60 Hz
With programmable timer counter to keep output ON for fix duration. Duration programmable in minute.
SettingVoltage, current, frequency by potentiometer Power Factor by push button keys, timer by thumb wheel switches
MeteringDigital AC Voltmeter, Digital AC Ammeter , Universal meter to indicate PF, W, VA, VAr of each phase. Also average of all phases, WHr Programmable current display to accommodate any CT ratio
Accuracy0.15% FS±10 dgts for voltage & current , 0.05%± 1 dgts for PF , 0.3% FS for watt meter, 0.02% for time duration Whr: 0.35%
Sinusoidal OutputsTHD 1.5%
ProtectionsOverload and Short circuit
Dimensions: W600 x D 600 x H 270 mmWeight: 40 kg without packing

Three Phase Secondary Injection Kit

Three Phase Secondary Injection Kit

Technical Specifications:
MakeZEAL
ModelZM3ΦSIK
Input230 Volt AC
Output Voltage Range0 to 300 V (L-N) or 0 to 520 Phase to Phase
Output Current Range0 to 6 A per phase
Mode3 Phase, 4 Wire
Output portsVr ,Vy,Vb-N Ir (Hi, Lo),Iy (Hi, Lo),Ib (Hi, Lo)
PF Range0.1 Lag to Unity to 0.1 lead to Unity.
Compliance20 VA, at FS on V ranges, Compliance: 30 VA, at FS on A channels
Frequency45 to 60 Hz With programmable timer counter to keep output ON for fix duration. Duration programmable in minute.
SettingBy coarse and fine set of potentiometers for Voltage and Current.
Power Factor Setting by push button keys.
MeteringDigital AC Voltmeter, Digital AC Ammeter ,Universal meter to indicate PF, W, VA, VAr of each phase. Also average of all phases, WHr (Energy)
Programmable current display to accommodate any CT ratio.
Accuracy class0.15% for V,A,W,Whr
Sinusoidal Outputs: THD < 2.0%
ProtectionsOverload and Short circuit

Voltage & Current Standards Multi Function Calibrators

Voltage & Current Standards Multi Function Calibrators

Features:


Specifications:

Technical Specifications:

 

arameterRangesAccuracy
DC Voltage200m, 2,20,200,1000, Volt+/-(0.1% rdg +5 digit)
* DC Current2m, 20m, 200m,2,10 Amp+/-(0.1% rdg +5 digit)
AC Voltage (45 to 1000 Hz)200m,2,20,200,900 Volt+/-(0.15% rdg +5 digit)
* AC Current (45 to 1000 Hz)2m, 20m, 200m, 2,10 Amp+/-(0.15% rdg +5 digit)
Extended Current Range for Clamp On Meter :
( AC or DC ) Using x 100 Current Coil
Bandwidth: DC- 50Hz
1000A for DC
800 Amp for AC @ 50Hz
+/-(0.2% rdg +10 digit)

 

Watt Meter Calibrator

Watt Meter Calibrator

Technical Specifications:

Make:ZEAL
ModelZMSΦPEC
Input:230 Volt AC
Mode:1 Phase,
Auxiliary power supply AC/DC.
Output Voltage Range:0 to 300 V (L-N)
Output Current Range:0 to 6 A
Output ports:
V Hi, V Lo),I (Hi, Lo)
PF Range:0.1 lag to Unity to 0.1 lead
Compliance:20 VA, at FS on V range, Compliance: 30 VA, at FS on A channel
Frequency:45 to 60 Hz
With programmable timer counter to keep output ON for fix duration. Duration programmable in minute.
Setting:By coarse and fine set of potentiometer for Voltage and Current By push button keys.
Metering:Digital AC Voltmeter, Digital AC Ammeter, Universal meter to indicate PF, W, Whr
Accuracy class:0.15% for V, A, W, Whr
Sinusoidal Outputs:THD 2.0%
Protections:Overload and Short circuit, overload protection for all output by fast acting relay

Multifunction Calibrator

Multifunction Calibrator

Multifunction Calibrator is intended for collecting information of different instruments used in various industries. By using sophisticated manufacturing techniques, premium grade of components and reliable working machines, this instrument is ideal to suit the requirements of our clients.

Features

Specifications

 


Additional Information:

Standard Resistor(100M Ohm)

Standard Resistor(100M Ohm)

Standard Resistor


1.Accuracy: 0.005%
2.Temperature Coefficient:20ppm/'C
3.No. of Terminals: 2
4.Operating Temperature: 15 to 25 'C

Standard Resistor (100 mOhm)

Standard Resistor (100 mOhm)

Standard Resistor(100m Ohm)


Features
1.Accuracy:0.02%
2.Temperature Coefficient:20ppm/ 'C
3.No. of Terminals: 4
4.Stability:50ppm/year
5.Operating Temp:15'C to 30 'C

Standard Resistor(0.001 Ohm )

Standard Resistor(0.001 Ohm )

Standard Resistor
1.Accuracy: 0.02%
2.Temperature Coefficient:20ppm/'C
3.No. of Terminals: 4
4.Stability: 50ppm/year
5:Operating Temp: 15 to 30 'C

Additional Information:

Instrument Calibration Services

Instrument Calibration Services

Instrument Calibration Services are appreciated among our clients for offering reliable and precise result when come on the term of calibration. Our offered service is traceable depending on national standards that require the certificate for parameters. These can be customized as per the specifications of our clients and available in cost effective prices. The calibration is done using HP, Fluke and Tektronix make standards, thus is used for calibrating electrical and electronic test and measurement instrument, process instrument (e.g. CRO, DMM, Clamp on Meter, Panel Meter, HV/ IR Tester, Temperature Indicator / controller Pressure Gauges).

Features

Instrument Calibration Services

Instrument Calibration Services

Instrument Calibration Services are appreciated among our clients for offering reliable and precise result when come on the term of calibration. Our offered service is traceable depending on national standards that require the certificate for parameters. These can be customized as per the specifications of our clients and available in cost effective prices. The calibration is done using HP, Fluke and Tektronix make standards, thus is used for calibrating electrical and electronic test and measurement instrument, process instrument (e.g. CRO, DMM, Clamp on Meter, Panel Meter, HV/ IR Tester, Temperature Indicator / controller Pressure Gauges).

Features

AC/DC 100kV High Voltage Measurement Probe

AC/DC 100kV High Voltage Measurement Probe

AC/DC High Voltage Measurement Probe

Make: ZEAL, Model: ZMHVP-ACDC1

Range: 0-100 kV AC & DC
Attenuation Ratio: 1kV: 100mV
Input Impedance: > 220 MΩ
Accuracy:For DC up to 40 kV: 2%, above 40 kV add 0.05%/kV.
For AC up to 40 kV: 2.5%, above 40kV add 0.08%/kV Accessories: 3.5 digit DMM

Additional Information:
X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Calibration Standards ?

    country-ico

    We will contact you soon !

    Vikas Rathod

    (Director)

    Zeal Manufacturing And Calibration Services Private Limited

    Erandwane, Pune, Maharashtra, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us